Irayple

Set up iRayple industrial cameras with the iRayple machine vision platform.

iRayple industrial cameras require the vendor’s Machine Vision Platform installation. Once the driver stack is installed and the camera works in the vendor viewer, you can connect it in AugeLab Studio.

Quick start

1. Install the iRayple Machine Vision Platform.

2. Verify live view in the vendor tool.

3. (GigE) Set a stable IP and confirm the camera is reachable.

4. Open AugeLab Studio and use the iRayple camera block/plugin.

Requirements

• iRayple camera (GigE/USB, depending on model)

• Power (external power supply or PoE, depending on model)

• For GigE: Ethernet cable and a GigE-capable network adapter (a switch is optional)

Install the vendor platform

Download and install the iRayple machine vision platform from the vendor download center:

• https://www.irayple.com/en/serviceSupport/downloadCenter/18?p=17

After installation, confirm you can start acquisition and see a live image in the iRayple software tools.

Connect in AugeLab Studio

1. Close the iRayple viewer/tools (so the camera is not locked by another app).

2. Open AugeLab Studio and add the iRayple Camera block (or iRayple plugin blocks).

3. Select your camera and start acquisition.

If you don’t see an iRayple block

iRayple support may be delivered as a plugin depending on your AugeLab Studio installation.

• Check the Plugin Window for iRayple-related plugins.

• If you are unsure what to install, contact [e-mail] with your camera model and connection type.

Troubleshooting

• Camera visible in vendor tool but not in Studio: close the vendor tool and retry.

• GigE camera not discovered: ensure PC and camera are on the same subnet; try a direct Ethernet connection.

• Unstable stream: reduce resolution/FPS; use a dedicated NIC; avoid Wi‑Fi and congested networks.