Siemens S7 Write
This function block is designed to write data to Siemens S7 PLC (Programmable Logic Controller) using the Snap7 library. It supports various data types and allows for dynamic interaction with the PLC.
π₯ Inputs
Enable
A boolean input to enable or disable the writing to the PLC.
Data
The data to be written to the PLC, provided in a compatible format according to the selected data type.
S7 Client
The connection details for the Siemens S7 PLC to which data will be written.
π€ Outputs
This function block does not produce any outputs.
πΉοΈ Controls
DB Number
Input field to specify the Data Block number for the PLC write operation.
DB Byte Address
Input field to specify the byte address within the Data Block.
Bit Position
Input field to specify the bit position, which is applicable only for boolean values.
DB Data Type
A dropdown menu that allows the selection of the data type being written (e.g., Boolean, Int, Real, etc.).
π¨ Features
Connection Handling
The block automatically manages connections to the PLC, reconnecting if the connection is lost or if the address changes.
Multi-threaded Writing
Utilizes a separate thread to handle writing operations, allowing for continuous data flow without blocking the main execution.
Dynamic Data Type Support
Supports various data types, enabling flexible data handling.
π Usage Instructions
Connect to S7 Client: Input the necessary details to connect to the S7 PLC in the
S7 Client
input. This might include IP address, port, rack, and slot numbers.Set DB Number: Input the event number in the
DB Number
field which indicates where to write data within the PLC.Specify Byte Address: Enter the byte address in the
DB Byte Address
field to define where the data should be written.Select Data Type: Choose the appropriate data type from the
DB Data Type
dropdown corresponding to the data you want to write.Input Data: Provide the data to be written into the PLC in the
Data
input.Enable Write Operation: Set the
Enable
input toTrue
to activate the write operation. The block will handle the writing based on the provided configurations.
π Evaluation
During the execution of this block, the specified data will be written to the defined location on the PLC. If the connection to the PLC is lost or invalid, an error message will be logged.
π‘ Tips and Tricks
π οΈ Troubleshooting
Last updated