Siemens S7 Connect
This function block establishes a connection with Siemens S7 PLC (Programmable Logic Controller) devices. It allows you to input the necessary connection parameters to communicate with the PLC.
📥 Inputs
This function block does not have any inputs.
📤 Outputs
S7 Client This output provides access to the S7 client for further communication with the connected PLC.
🕹️ Controls
IP Address A field where you can input the IP address of the PLC you want to connect to. The default is set to 192.168.0.1.
PLC Rack A field to input the rack number of the PLC. Default value is 0.
PLC Slot This field allows you to specify the slot number in the rack where the PLC is located. The default is 1.
PLC TCP Port A field to specify the TCP port for connecting to the PLC. The default value is 102.
🎨 Features
Easy Configuration The layout allows easy input for essential connection parameters.
Dynamic Connectivity Users can configure connection attributes to establish a real-time link to the PLC.
📝 Usage Instructions
Set IP Address: Input the PLC's IP address in the corresponding field if different from the default.
Configure Rack and Slot: Enter the rack and slot numbers where the PLC is located. Ensure that these values match your PLC configuration.
Set TCP Port: Adjust the TCP port if necessary, using the default or specifying another port used by the PLC.
Establish Connection: When you run the block, it will output the set parameters for use in establishing the PLC connection.
📊 Evaluation
When executed, this function block outputs the connection parameters needed to establish a client connection to the Siemens S7 PLC.
🛠️ Troubleshooting
Last updated